190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
251
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeS inDeX
Duplicates
Message
Figure 5-93 Duplicate Waypoints
Waypoint
Selection
Button
Adding a waypoint to the active flight plan:
1) From Home, touch Flight Plan.
2) Touch a waypoint button to display the Waypoint Options Window.
3) Touch the Insert Before Button or the Insert After Button to select where the new waypoint will be placed
in relation to the selected waypoint. The keypad is displayed.
4) Use the keypad, right knob, or the Find function to select the new waypoint.
5) Touch the Enter Button to accept the waypoint and place it in the flight plan.
Adding a waypoint to the active flight plan using the GDU Controller:
1) Press the FPL Key.
2) Select the point in the flight plan before which to add the new waypoint. The new waypoint is placed directly
in front of the highlighted waypoint.
3) Turn the small FMS Knob to display the Waypoint Information Window. (Turning it clockwise displays a blank
Waypoint Information Window, turning it counter-clockwise displays the Waypoint Information Window with a
waypoint selection submenu allowing selection of active flight plan, nearest, recent, user, or airway waypoints).
4) Enter the identifier, facility, or city name of the waypoint or select a waypoint from the submenu of waypoints
and press the ENT Key. The active flight plan is modified as each waypoint is entered.
Figure 5-94 Adding a Waypoint to the Active Flight Plan on the PFD
Selected
Waypoint
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
