Garmin G2000 - Page 280

Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A266
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeSinDeX
REMOVING FLIGHT PLAN ITEMS
Individual waypoints, entire airways, and entire procedures can be deleted from a flight plan. Some waypoints
in the final approach segment (such as the FAF or MAP) can not be deleted individually. Attempting to delete
a waypoint that is not allowed results in a window displaying ‘Invalid flight plan modification.’
Removing an individual waypoint from the active flight plan:
1) From Home, touch Flight Plan
2) Scroll the list if necessary and touch a waypoint selection button to display the Waypoint Options Window.
3) Touch the Remove Waypoint Button.
4) Touch the OK Button in response to “Remove <waypoint name>?” The waypoint is removed. To cancel the
request, touch the Cancel Button.
Removing an individual waypoint from the active flight plan using the GDU Controller:
1) Press the FPL Key to display the Flight Plan Window (PFD).
2) Turn the large PFD Key to highlight the waypoint.
3) Press the CLR Key. The ‘Remove <waypoint name>?’ window is displayed.
4) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘CANCEL’ and
press the ENT Key.
Removing an entire airway from the active flight plan:
1) From Home, touch Flight Plan
2) Scroll the list if necessary and touch an airway selection button to display the Airway Options Window.
3) Touch the Remove Airway Button.
4) Touch the OK Button in response to “Remove Airway -<airway name> from flight plan?” The airway is
removed, but the starting and ending waypoints remain in the flight plan. To cancel the request, touch the
Cancel Button.
Removing an entire airway from the active flight plan using the GDU Controller:
1) Press the FPL Key to display the Flight Plan Window (PFD).
2) Turn the large PFD Knob to highlight the airway header.
3) Press the CLR Key. The ‘Remove <airway name> from flight plan?’ window is displayed.
4) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘CANCEL’ and
press the ENT Key.
Removing an entire procedure from the active flight plan:
1) From Home, touch Flight Plan
2) Scroll the list if necessary and touch a departure, arrival, or approach selection button to display the Departure,
Arrival, or Approach Options Window.
This manual downloaded from http://www.manualowl.com