190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
267
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeS inDeX
3) Touch the Remove Departure Button, the Remove Arrival Button, or the Remove Approach Button.
4) Touch the OK Button in response to “Remove <procedure> -<procedure name> from flight plan?” The
procedure is removed (the departure airport remains when removing a departure). To cancel the request, touch
the Cancel Button.
Removing an entire procedure from the active flight plan using the GDU Controller:
1) Press the FPL Key to display the Flight Plan Window (PFD).
2) Turn the large PFD Key to highlight the procedure header.
3) Press the CLR Key. The ‘Remove <procedure name> from flight plan?’ window is displayed.
4) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘CANCEL’ and
press the ENT Key.
Removing an individual waypoint from a stored flight plan:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Scroll the list if necessary and touch a flight plan options button to display the Catalog Options Window.
4) Touch the Edit Button.
5) Scroll the list if necessary and touch a waypoint selection button to display the Waypoint Options Window.
6) Touch the Remove Waypoint Button.
7) Touch the OK Button in response to “Remove <waypoint name>?” The waypoint is removed. To cancel the
request, touch the Cancel Button.
Removing an entire airway from a stored flight plan:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Scroll the list if necessary and touch a flight plan options button to display the Catalog Options Window.
4) Touch the Edit Button.
5) Scroll the list if necessary and touch an airway selection button to display the Airway Options Window.
6) Touch the Remove Airway Button.
7) Touch the OK Button in response to “Remove <airway name>?” The airway is removed, but the starting and
ending waypoints remain in the flight plan. To cancel the request, touch the Cancel Button.
Removing an entire procedure from a stored flight plan:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Scroll the list if necessary and touch a flight plan options button to display the Catalog Options Window.
4) Touch the Edit Button.
5) Scroll the list if necessary and touch a departure, arrival, or approach selection button to display the Departure,
Arrival, or Approach Options Window.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
