GE LOGIQ P5 Service Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
4-22 Section 4-3 - General Procedure
4-3-11-3 Restore System Presets and Configurations
1.) Insert the Backup/Restore CD-R or DVD-R into the drive.
2.) Press the UTILITY
. key
3.) Select SYSTEM
.menu on the monitor screen
4.) On the monitor display, select BACKUP/RESTORE
.
5.) In the Restore list, select Patient Archive, Report Archive, User Defined Configuration.
6.) In the Media field, select the Backup/Restore DVD-R.
7.) Select RESTORE
.
d.) The system performs the restore. As it proceeds, status information is displayed on the
Backup/Restore screen.
CAUTION
The restore procedure overwrites the existing database on the local hard drive. Make sure to insert
the correct CD-R or DVD-R.
Figure 4-17 Backup/Restore Menu

GE LOGIQ P5 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Display	15" LCD
Doppler Modes	Color Doppler, Power Doppler
Imaging Modes	B-Mode, M-Mode
Probes	Convex, Linear, Phased Array
Applications	Abdominal, Vascular, Cardiac, OB/GYN, Small Parts, Musculoskeletal
Connectivity	DICOM, USB, Ethernet
Probe Connectors	3
Portability	Mobile
Operating Temperature	10°C to 40°C
Relative Humidity	30%