GE MAC 5 A4 User Manual

Configure Settings
Field Action Description
EAP Phase 2 Select a value
from the drop-
down list to
configure EAP
Phase 2.
This field is available only when EAP Phase 1 is
configured as PEAP or TTLS.
Default value: MSCHAPv2
Allowed values:
• MSCHAPv2
• GTC
Anonymous
Identity
Enter the
Anonymous
identity.
Default value: No default value
Allowed values: Any value (up to 256 characters)
NOTE:
The default industrial standard for wireless
networks is anonymous all lowercase unless the
user has created a custom Anonymous Identity.
User Name Enter the user
name.
Default value: No default value
Allowed values: Any value (up to 256 characters)
Password Enter the
password.
This field is available only when EAP Phase 1 is
configured as PEAP or TTLS.
Default value: No default value
Allowed values: Any value (up to 256 characters)
CA Certificate Enable or disable
this setting.
Only PEM encoded certificate is supported.
This field must be enabled when EAP Phase 1 is
configured as TLS and cannot be disabled, and optional
when EAP Phase 1 is configured as TTLS or PEAP.
If CA certificate is enabled, make sure that the CA
certificate is installed. See Install Wireless Certificates on
page 239.
Default value:
• Disabled, when EAP Phase 1 is configured as TTLS or
PEAP
• Enabled, when EAP Phase 1 is configured as TLS
Client
Certificate
Enable or disable
this setting.
Only PEM encoded certificate is supported.
This field must be enabled when EAP Phase 1 is
configured as TLS and cannot be disabled, and optional
when EAP Phase 1 is configured as TTLS or PEAP.
If Client Certificate is enabled, make sure that the client
private key and client public key are installed. See Install
Wireless Certificates on page 239.
Default value:
• Disabled, when EAP Phase 1 is configured as TTLS or
PEAP
• Enabled, when EAP Phase 1 is configured as TLS
236  MAC
™
5 A4/MAC
™
5 A5/MAC
™
5 Lite 5864335-001-1

GE MAC 5 A4 Specifications

General

Brand	GE
Model	MAC 5 A4
Category	Measuring Instruments
Language	English