GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-29
PRELIMINARY
6.) Select Configure.
7.) From the drop-down menu, select the desired printer and press OK.
8.) In the Printer Properties window, select OK.
Printing may now be activated direct from the Control Panel, using the hot key you have configured
for this purpose.
P1 Button Configuration via the Windows Control Panel
NOTE: If a customer has more than one printer and prefers to configure button P1 to activate a non-configured
printer, the non-configured printer must be configured as the default printer via the Windows Control
Panel, as described below.
The Sony UP-897 printer is used as an example in the following procedure.
1.) Press Config (or F2).
2.) Select Connectivity (in the lower part of window).
Figure 3-23 Printer Setup Screen
To Next Page
Loading...
