GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
1-20 Section 1-5 - Product Labels and Icons
PRELIMINARY
1-5-2 Label Descriptions and Locations
The following table shows the labels and symbols that may be found on the Vivid S5 N or Vivid S6 N
ultrasound unit, and provides a description of each label’s purpose and location.
Table 1-7 Product Icons
Label Name Description Location
Identification and Rating Plate
Manufacturer’s name and address.
Date of Manufacture.
Model and Serial numbers.
Electrical ratings (Volts, Amps, phase, and
frequency.
Rear of the system.
Type/Class Label
Used to indicate the degree of safety or
protection.
Bottom panel of the adapter
Equipment Type BF (man in the box symbol)
IEC 878-02-03 indicates B Type equipment
having a floating applied part.
Probe connectors.
“CAUTION” The equilateral triangle is usually
used in combination with other symbols to
advise or warn the user.
Various.
“ATTENTION - Consult accompanying
documents” is intended to alert the user to refer
to the User Manual or other instructions when
complete information cannot be provided on
the label.
Various.
“CAUTION - Dangerous voltage” (the lightning
flash with arrowhead in equilateral triangle) is
used to indicate electric shock hazards.
Various.
Device Listing/Certification
Labels
Laboratory logos or labels that denote
conformity with industry safety standards, such
as UL or IEC.
On the base of the unit
CE certification mark. On the base of the unit
To Next Page
Loading...
