GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-47
PRELIMINARY
inwards, gently turn the base from side to side while pulling upwards and away from the support
arm.
8.) Carefully unthread the cables from the Key Board Interface Assembly as shown in the movie clip.
8-3-5-4 Keyboard Interface Assembly Installation Procedure
NOTE: When returning the cables through the Keyboard Interface Assembly base, ensure that
you thread the cables from the bottom side of the Keyboard Interface Assembly base
through to the upper side.
1.) Thread the cables in the following order through the aperture in the Keyboard Interface Assembly:
a.) Black power cable
b.) DVI cable
c.) All remaining cables
Figure 8-59 Keyboard Interface Assembly Showing Cables Exiting the Base From Below
USB Cable
Data Cable
LCD Power Cable
To Next Page
Loading...
