GE Vivid S5 N - 6-1-2-5-2 Turning Off the Blue Tint “2” Option; 6-1-2-6 Autosensor Adjustment Procedure for Vivid S6 N only

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 6 - Service Adjustments 6-7
PRELIMINARY
6-1-2-5-2 Turning Off the Blue Tint “2” Option
1.) Press Config > Service.
The Service Screen opens - see Figure 6-9.
.
2.) Under LCD Setup, de-select Blue Tint “2” to turn off this option.
6-1-2-6 Autosensor Adjustment Procedure for Vivid S6 N only
• To adjust the monitor automatically by using light sensors:
Press on the <AutoSensor> button on the soft menu keys.
• Exit the Calibration Screen by pressing on <TestPattern> from the soft menu keys and then on the
<F4> key (also labeled <LCD>).
Figure 6-9 Service Screen - LCD Setup