GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
7-134 Section 7-7 - Automatic Error Log
PRELIMINARY
7-7-2 Extracting Logs (cont’d)
7-7-2-1 Formatting a CD
Prior to exporting logs or any data onto a CD, this media must be formatted, as described below.
To Format a CD:
1.) Insert the blank CD media into the DVD/CD-RW drive tray.
2.) On the Vivid S5 N or Vivid S6 N system, press the <Config> key.
3.) Select the Connectivity Tab and activate the Tools Tab.
4.) Under Removable Media, select the media type CD from the Media drop-down menu, as shown in
Figure 7-95.
5.) Click the Format button.
When CD formatting is complete, a formatting successful message is displayed together with
details of the CD capacity.
Figure 7-95 Connectivity - Tools - Removable Media
To Next Page
Loading...
