GE Vivid S5 N - 3-7-2 Physical Connection; 3-7-2-1 Ethernet Switch Connections; 3-7-2-2 Local Network Connection to EchoPAC PC Workstation

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-103
PRELIMINARY
3-7-2 Physical Connection
3-7-2-1 Ethernet Switch Connections
An Ethernet Switch (P/N: 066E0741), is used to connect the Vivid S5 N or Vivid S6 N system to an
EchoPAC PC and a network printer.
3-7-2-2 Local Network Connection to EchoPAC PC Workstation
Figure 3-118 Local Network Connection
Figure 3-117 Ethernet Switch Identifications
Position Label Function
X
To PC
To connect an end station or a Server to the Port
=
To HUB
To connect a HUB or another Switch to the Port
Table 3-6 MDI Button Position Descriptions
MDI Button
Controls the fifth
connector, making it
crossed or non-crossed.
Informative LEDS
Ethernet Cable
connectors
EchoPAC PC
Vivid7
Do not use the fifth connector and the
switch can be in any position,
Use only Standard non-crossed Ethernet
cabling.
Vivid S6