GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-37
PRELIMINARY
3-5-1-3-1 Configuring the HP 5400K DeskJet Color Printer for Connection via USB Port
1.) Log in to Windows® with Administrator permission.
2.) On the console, press the Config button (or F2) and click the Service tab at the bottom of the
screen.
3.) From the Network Printer dialog box select the HP K5400 printer.
4.) Click Start Setup Program and follow the on-screen installation wizard instructions.
5.) Proceed as follows:
- If the software has not been installed, the HP installation wizard requests you to accept the
installation. Follow the instructions on the screen. Proceed to step 6 below to connect via a
USB cable.
- If the screen displays The Software has already been installed on your computer as
shown in Figure 3-34, then select the option to Add a device and click Next.
Figure 3-34 Adding a Device
To Next Page
Loading...
