GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
6-4 -
PRELIMINARY
6-1-2-4 Blue Tint Adjustment Procedure
• To adjust the Blue Tint: Rotate the second right rotary knob on the soft menus keys, as required.
Counterclockwise rotation will decrease the blue tint level.
Clockwise pressing will increase the blue tint level.
• To assist in making blue tint adjustments, an adjustment bar is displayed below the screen:
• Exit the Calibration Screen by pressing on <TestPattern> from the soft menu keys and then on the
<F4> key (also labeled <LCD>).
Figure 6-5 LCD Display - Blue Tint Adjustment
To Next Page
Loading...
