GE Vivid S5 N - 3-3-1-2 Unpacking the Vivid S5 N or Vivid S6 N

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-9
PRELIMINARY
3-3-1-2 Unpacking the Vivid S5 N or Vivid S6 N
1.) Cut the two plastic straps securing the shipping carton to the wooden base - see Figure 3-3 on
page 3-7.
2.) Carefully cut the adhesive tape used to close the shipping carton upper lid and open the four folded
flaps - see Figure 3-5.
3.) From each side, remove the screws securing the outer cardboard to the wooden base.
4.) Remove the outer cardboard walls pulling them gently upwards and away from the system
(Figure 3-6).
CAUTION
WHEN USING SHARP TOOLS TO OPEN PACKING MATERIALS, TAKE CARE TO AVOID
CUTTING OR DAMAGING ANY OF THE CONTENTS.
Figure 3-5 Opening the Shipping Carton
Remove Screws