GE Vivid S5 N - 3-7-9-1-2 Manually Stopping the Firewall on the Network PC; Stopping the Windows Firewall

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-153
PRELIMINARY
m.) Activate the Allow check boxes for all of the following: Full Control, Change, and Read.
n.) Click the OK button.
o.) Close all windows.
Note: The network computer is now ready to receive files from the Vivid S5 N or Vivid S6 N
system. At this stage, set the appropriate path for export of files into the network computer.
For example, for eVue, Data Flow or MpegVue export into the network computer using the
browsing option to select the appropriate path. For an example of dataflow settings, refer to
Figure 3-163 on page 3-142.
3-7-9-1-2 Manually Stopping the Firewall on the Network PC
NOTE: In some cases, it is necessary to stop the firewall to allow functions such as Excel export and eVue to
access and load files into the Network Computer. The Firewall can be an external service, or part of the
Windows Basic Firewall tools.
Stopping the Windows Firewall
1.) On the network computer, access the Control Panel, as follows:
a.) Press Start.
b.) Select Settings.
Figure 3-175 Setting Permissions for EchoClient User
Activate Allow
for all
check boxes