GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
3-38 Section 3-4 - Preparing for Installation
PRELIMINARY
6.) Select the USB cable option for connecting the device to the computer, then click Next - see
Figure 3-35
7.) Follow the instructions on the Connect Your Device Now screen, (Figure 3-36). Place a
check mark in the option at the bottom of the screen indicating that you are unable to currently
connect the device.
8.) Click Next. The Service screen opens.
9.) From the Service screen, click the Connectivity tab and select Additional Outputs as shown
in Figure 3-37.
.
Figure 3-35 Connecting via USB Cable
Figure 3-36 Connecting the device to the computer
To Next Page
Loading...
