GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-185
PRELIMINARY
Note: The MpegVue Player can be used as a regular player, using the Play, Stop, Forward, and
Rewind buttons. In addition, the user can forward images by e-mail, save images, and
perform measurements, as previously described.
The MpegVue Player displays two rows of command keys at the bottom of the screen. If
the remote computer is set up to view many Tool Bars, the lower row of the MpegVue
command keys might not be visible. Therefore, it is recommended to remove most Tool
Bars (by selecting <View> <Tool Bars> and un-checking all tools that are not required) until
both lines of command keys are visible, as shown below.
Figure 3-212 MPEGVue Player - Command Keys
To Next Page
Loading...
