GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
8-68 Section 8-3 - Control Console Components Replacement Procedures
PRELIMINARY
12) Lower the console to the maximum down position.
13.)Turn ON power to the system.
14.)Check for proper up/down and side-to-side movement of the operator panel and monitor, as
described in “Mechanical Functional Tests” on page 4-35.
15.)Proceed to perform the following functionality tests:
- “Grounding Continuity” on page 10-23
- “Chassis Current Leakage Test” on page 10-24
To Next Page
Loading...
