GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-227
PRELIMINARY
6. Select the following option:
Update User Manual)
then press <Enter>.
The following message is displayed:
During the PDF upload, progress is shown as follows:
When the upload process is complete, the message window closes.
7. Select the following option:
Reboot Machine
then press <Enter>.
The following message is displayed:
8. IMPORTANT.
Perform these steps before proceeding!
a.)Remove the USB Flash Drive from the USB port on
the Front of the Operator Panel.
b.)Check that no other media is connected to the system
(e.g. DVD drive).
c.)Press [OK] to continue.
The system reboots into normal scanning mode.
9. Verify the User Manual version corresponds with the
version you have installed (check against the label on
the USB Flash Drive) and that it was correctly installed.
Table 8-4 Loading Latest Version Vivid S5 N / Vivid S6 N User Manuals(cont’d)
Step Instruction Expected Result
To Next Page
Loading...
