WR
PROT/WR
ENA
Softkey Menus
The jumper on jack A2J12 is shipped from the factory in the WR PROT (write protect)
position (jumper on pins 2 and 3). Wh
en the jumper is set to the WR ENA (write enable)
position (jumper on pins 1 and 2), an alternate softkey menu is displayed under (CAL).
Figure 6-3 illustrates those areas of the (CAL) menu that are unique to the WR ENA mode of
operation.
6-6 General Troubleshooting
To Next Page
Loading...
