9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-9
■ Using the EMR communication function (Continued)
D Adjusting the EMR AF level
The audio output level when an EMR signal is received
is adjustable between 0 and 39.
When an EMR signal is received, the audio will be
heard at the preset level, or the [VOL] control level,
whichever is higher.
To disable the setting, set it to “0.”
q Push [MENU] .
w Push D-pad() to select the root item (“DV Set”),
and then push D-pad(Ent).
e Push D-pad() to select “EMR AF Level,” and then
push D-pad(Ent).
r Push D-pad() to adjust the EMR audio output level
between 0 (minimum) and 39 (maximum) in single
digit steps. (Default: 19)
t Push [MENU] to exit the MENU screen.
■ Display type setting
To see repeater names, call signs, and so on better,
you can change the letter size in the DR screen.
(Default: Normal)
q Push [QUICK] .
w Push D-pad() to select “Display Type,” and then
push D-pad(Ent).
e Push D-pad() to select “Large,” and then push D-
pad(Ent).
• The display size changes to large.
To Next Page
Loading...
Need help?
General
