9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-12
The Auto Reply voice announcement can be recorded
and saved on the microSD card to reply to the call with
your voice.
NOTE: Be sure to insert a microSD card to the [micro
SD] slot of the transceiver before starting to record a
voice signal.
q Push [MENU]
.
w Push D-pad() to select the root item (“Voice
Memo”), and then push D-pad(Ent).
e Push D-pad() to select “DV Auto Reply,” and then
push D-pad(Ent).
r Push [PTT] to start recording. (No RF is transmit-
ted)
• After releasing [PTT], the recording is cancelled.
• Maximum record period is 10 second
• Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak at your normal voice level.
• Only one announcement can be recorded. The current
contents will be overwritten if you record again.
t Push [MENU] to exit the MENU screen.
D Playing back the recorded voice audio
The recorded voice audio for the Auto Reply function can
be played back.
q Push [MENU] .
w Push D-pad() to select the root item (“Voice
Memo”), and then push D-pad(Ent).
e Push D-pad() to select “DV Auto Reply,” and then
push D-pad(Ent).
r Push D-pad(Ent) to start the playback.
t Push [MENU] to exit the MENU screen.
TIP: You can delete the recorded audio.
➥ On the DV AUTO REPLY screen, push [QUICK]
, and then push D-pad(Ent).
When no microSD card is inserted:
When no microSD card is in-
serted, this error message is
displayed.
■ Automatic Reply function (Continued)
D Recording an Auto Reply voice announcement
Recording time
is displayed
While playing back
While recording
Audio level is displayed
To Next Page
Loading...
Need help?
General
