5
BASIC OPERATION
5-9
■ Monitor function
Using this function, you can listen to weak signals with-
out disturbing the squelch setting, or having to manu-
ally open the squelch, even when using mute functions
such as tone squelch.
➥ Hold down [SQL] to monitor the operating frequen-
cy.
• The 1st segment of the S-meter blinks.
The first segment
blinks
■ Selecting the operating mode
Operating modes are determined by the modulation
of the transceiver signals. The transceiver’s operating
modes are AM, FM, FM-N and DV.
➥ Push [MODE] one or more times to select the
operating mode.
• The AM mode can be used for only the AIR band (108.000
MHz to 136.995 MHz) and AM BC radio (0.520 MHz ~
1.710 MHz).
• When the GPS TX Mode is selected, “DV-G” or “DV-A”
appears instead of “DV.” (p. 10-31)
FM mode is selected
FM-N mode is selected
DV mode is selected
AM mode is selected
[SQL]
TIP: The [SQL] key can be set to ‘sticky’ operation in
the Function menu.
(MENU > Function > Monitor) (p. 16-73)
To Next Page
Loading...
Need help?
General
