Icom ID-51A User Manual

6
BC RADIO OPERATION
6-8
■ Basic operation (Continued)
D Setting a tuning step (AM Only)
If you select the BC Radio frequency by rotating [DIAL]
in the Tuning mode, the frequency changes in the se-
lected tuning step.
q Push [MODE] to select the AM mode.
w Push [QUICK] .
e Push D-pad() to select “TS,” and then push D-
pad(Ent).
D-pad
()
(Ent)
r Push D-pad() to select the desired tuning step be-
tween 1.0 kHz, 9.0 kHz and 10.0 kHz.
t Push D-pad(Ent) to save and exit the Quick Menu
screen.
When the 10.0 kHz
step is selected.
The frequency changes in the
selected tuning step.
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)