13
SCAN OPERATION
13-12
Example: Set “SKIP” to Memory channel “009.”
Memory channel
number
Rotate [DIAL] to select
the memory channel.
Push [QUICK]
.
“SKIP” is set.
The channels set as “SKIP” or “PSKIP” skip channels
are skipped (not scanned).
TIP: See page 13-8 for details of clearing the skip set-
ting.
q Push [M/CALL]
one or more times to select the
Memory mode.
w Rotate [DIAL] to select the memory channel to be
set as a skip channel.
e Push [QUICK] .
r Push D-pad() to select “SKIP” or “PSKIP,” and then
push D-pad(Ent).
• OFF : Cancel the skip setting.
• SKIP : Skipped during a memory scan.
• PSKIP : Skipped during both VFO and memory scans.
t Push D-pad(Ent) to save the selection.
• The skip setting is set.
[DIAL]
■ Setting the skip channel
Push D-pad() to
select, then push
D-pad(Ent).
Push D-pad() to
select, then push
D-pad(Ent).
To Next Page
Loading...
