EasyManuals Logo

Icom ID-51A User Manual

Icom ID-51A
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
2
USING A microSD CARD
2-2
About the microSD card
The microSD and microSDHC cards are not available
from Icom. User supplied.
A microSD card of up to 2 GB or a microSDHC of up to
32 GB, can be used with the ID-51A/E.
Icom has checked the operation with the following mi-
croSD and microSDHC cards.
(As of September 2016)
Brand Type Memory size
SanDisk
®
microSD 2 GB
microSDHC
4 GB
8 GB
16 GB
32 GB
The above list does not guarantee the card’s perfor-
mance.
Through the rest of this document, the microSD and
a microSDHC cards are simply called microSD cards
or the cards.
Icom recommends that you format all microSD cards
to be used with the transceiver, even preformatted mi-
croSD cards for PCs or other uses.
The following data can be stored onto the card:
Transceiver data
Memory channel contents, Repeater List, Your (UR)
call sign memory and GPS memory that are stored in
the transceiver.
Communication audio
The transmitted and received audio.
Communication log
The communication and receive history log.
Automatic answering voice audio in the DV mode
Voice audio to use with the Auto Reply function in the
DV Mode.
V
oice audio for the Voice TX function
Voice audio to use with the Voice TX function.
Position data from the GPS receiver
Position and time data from a GPS receiver that is in a
log file as a route.
Voice Recorder
The microphone audio.
Saving data onto the microSD card
NOTE:
Before using the microSD card, read the microSD
card instructions thoroughly.
If you do any of the following, the microSD card data
may be corrupted or deleted.
- Remove the microSD card from the transceiver
while accessing the microSD card.
- Change the external power source voltage while
accessing the microSD card.
- Start the vehicle engine while accessing the mi-
croSD card.
- Drop, impact or shake the microSD card.
Do not touch the contacts of the microSD card.
The transceiver takes a longer time to recognize a
high capacity microSD card.
The microSD card will get warm if used continuously
for a long period of time.
The microSD card has a certain lifetime, so data
reading or writing may not be possible after using it
for a long time period.
When reading or writing data is impossible, the
microSD card’s lifetime has ended. In this case,
purchase a new one. We recommend that you oc-
casionally make a backup file of the important data
onto your PC.
Icom is not responsible for any damage caused by
data corruption of a microSD card.
TIP: Occasionally saving the data is recommended.
Insert the card into the transceiver’s slot, and then
enter the Menu screen.
(MENU > SD Card > Save Setting) (p. 16-95)
Previous view

Table of Contents

Other manuals for Icom ID-51A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom ID-51A and is the answer not in the manual?

Icom ID-51A Specifications

General IconGeneral
Frequency Range144-148 MHz, 430-450 MHz
Antenna ConnectorSMA
GPS ReceiverYes
WaterproofIPX7
ModesFM, DV
Weight255 g
Memory Channels1304 channels
Output Power5W (High), 2.5W (Middle), 0.5W (Low)

Related product manuals