Icom ID-51A - Function Display

INDEX
20-7
DTCS
DTCS Code ……………………………………… 16-17
DTCS code setting and operation …………… 17-15
DTCS Polarity …………………………………… 16-17
DTCS squelch operation ……………………… 17-15
DTMF
DTMF code programming ……………………… 17-8
DTMF code transmission ……………………… 17-10
DTMF code transmission (Direct Input) ……… 17-11
DTMF Memory ………………………………… 16-68
DTMF Speed …………………………………… 16-68
DTMF/T-CALL items …………………………… 16-68
DTMF transfer speed …………………………… 17-12
Monitoring the stored DTMF code …………… 17-9
Using the DTMF memory ……………………… 17-8
Dualwatch operation ……………………………… 5-3
Audio mute during Dualwatch operation ……… 5-4
MAIN band selection ……………………………… 5-3
Setting the volume for Dualwatch ……………… 5-5
Single watch operation …………………………… 5-3
Duplex operation …………………………… 15-4, 15-5
Setting the duplex direction …………………… 15-5
E
Earphone Mode ………………………………… 16-88
EMR function
Adjusting the EMR AF level ……………………… 9-9
EMR ……………………………………………… 16-64
EMR AF Level …………………………………… 16-65
Using the EMR communication function ……… 9-8
Exporting a CSV format file …………………… 2-14
F
Fast-forward while playing ……………………… 11-5
File Split …………………………………………… 16-24
FM Antenna ……………………………………… 6-17
FM Repeater operation ………………………… 15-2
Formatting the microSD card ……………… 2-3, 16-96
Frequency
Setting a frequency ……………………………… 5-8
Setting the frequency offset …………………… 15-4
“FROM” (Access repeater) setting ………………… 8-2
Using the preloaded Repeater List ……………… 8-3
Using the DR scan ………………………………… 8-4
Using the Repeater Search function …………… 8-5
Using the TX History ……………………………… 8-7
Front panel ………………………………………… 3-2
Function display …………………………………… 3-5
G
GPS
Add a GPS memory …………………………… 10-13
Alarm Area (Group) …………………………… 16-39
Alarm Area (RX/Memory) ……………………… 16-40
Caller’s TX format ……………………………… 10-5
Changing the Compass Direction …………… 10-10
Changing the GPS memory/alarm channel … 10-10
Changing the Grid Locator …………………… 10-10
Checking GPS Information (Sky view screen) 10-12
Checking GPS Position ………………………… 10-3
D-PRS …………………………………………… 10-24
Operating ……………………………………… 10-24
Setting ………………………………………… 10-25
Transmitting …………………………………… 10-24
Data Extension ………………………………… 16-48
Deleting GPS data ……………………………… 10-19
Displaying Position Data ……………………… 10-3
Displaying your position using a mapping program … 10-29
Entering a GPS message ……………………… 10-32
Entering the GPS group name ……………… 10-18
GPS alarm ……………………………………… 10-21
GPS automatic transmission ………………… 10-33
GPS Auto transmission ………………………… 10-33
GPS Auto TX …………………………………… 16-50
GPS Data Speed ……………………………… 16-62
GPS data sentence …………………………… 10-31
GPS data (D-PRS and NMEA) ……………… 10-23
Transmitting …………………………………… 10-23
Type of position data ………………………… 10-23
GPS Indicator …………………………………… 16-33
GPS Information ………………………………… 16-34
GPS items ……………………………………… 16-32
GPS Logger …………………………… 10-34, 16-41
<<GPS Logger Only>> ……………………… 16-42
GPS Logger operating outline ……………… 10-34
Record Interval ………………………………… 16-41
Record Sentence ……………………………… 16-41
Route on a PC Map …………………………… 10-36
Using <<GPS Logger Only>> mode ………… 10-38
GPS Memory …………………………… 10-13, 16-38
Rearranging the display order ……………… 10-20
GPS memory operation ……………………… 10-13
GPS Message ………………………………… 16-50
☞ “G” continues on the next page.
Previous view