13
SCAN OPERATION
13-8
■ Setting and clearing the skip frequencies (Continued)
D Clearing the skip setting
q Push [M/CALL] one or more times to select the
Memory mode.
w Rotate [DIAL] to select the memory channel you
want to clear as the skip channel.
e Push [QUICK] .
r Push D-pad() to select “SKIP,” and then push
D-pad(Ent).
t Push D-pad() to select “OFF.”
• OFF : Cancel the skip setting.
• SKIP : Skipped during a memory scan.
• PSKIP : Skipped during both VFO and memory scans.
y Push D-pad(Ent) to save the selection.
• The skip setting is canceled.
The channel that
is programmed as
a skip frequency.
Push [M/CALL]
,
then rotate [DIAL] to
select the memory
channel to clear its skip
setting.
Push [QUICK]
.
TIP: The skip setting is also cancelled when the mem-
ory channel set as skip channel is deleted.
See page 12-13 for details.
[DIAL]
“PSKIP” disappears.
Push D-pad() to
select, then push
D-pad(Ent).
To Next Page
Loading...
