5
BASIC OPERATION
5-5
When “All” or “BC Radio Separate” is selected:
➥ Rotate [VOL] to adjust the audio level.
• The audio output levels for A band and B band are ad-
justed at the same time:
When “Separate” is selected:
q Push [MAIN] for 1 second to select A band or B
band for the MAIN band.
w Rotate [VOL] to adjust the audio level.
• You can adjust the audio output level of the selected
band.
For example, even if you adjust the audio output level for
A band, B band’s audio level stays at the original level.
■ Dualwatch operation (Continued)
D Setting the volume for Dualwatch
The volume setting for Dualwatch can be simultane-
ously set for both bands or separately for each band, in
the MENU screen.
q Push [MENU] to enter the Menu screen.
w Push D-pad() to select the root item (Sounds), and
then push D-pad(Ent) to go to the next level.
( MENU > Sounds > Volume Select)
e Refer to the menu sequence shown directly above
and push D-pad() to select, and then push D-
pad(Ent) to enter, one or more times until the last
screen is displayed.
r Push D-pad() to select the desired option.
• All: The audio output level for the BC
Radio, A band and B band are ad-
justed at the same time.
• BC Radio Separate: The audio output level for the BC
Radio is independently adjusted.
The audio output level for A band
and B band are adjusted at the
same time.
• Separate: The audio output level for the BC
Radio, A band and B band are inde-
pendently adjusted.
t Push [MENU] to exit the Menu screen.
[VOL]
To Next Page
Loading...
Need help?
General
