6
BC RADIO OPERATION
6-17
■ BC Radio settings
D FM Antenna
Select the desired antenna for FM radio.
q Push [MENU] .
w Push D-pad() to select the root item (“BC Radio”),
and then push D-pad(Ent) to go to the next screen.
(MENU > BC Radio > BC Radio Set> FM Antenna)
e Refer to the menu sequence shown directly above
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
r Push D-pad() to select the desired antenna to use
for the FM radio
• External: An external antenna is used.
• Earphone: An earphone antenna is used.
t Push [MENU] to exit the MENU screen.
D Power Save (BC Radio)
Set the power save function to reduce current drain and
conserve battery power when the BC Radio is ON.
q Push [MENU] .
w Push D-pad() to select the root item (“BC Radio”),
and then push D-pad(Ent) to go to the next screen.
( MENU > BC Radio > BC Radio Set> Power Save
(BC Radio))
e Refer to the menu sequence shown directly above
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
r Push D-pad() to set the power save function when
the BC Radio is ON.
• OFF: The power save function is OFF.
• ON: When the BC Radio is ON, and no signal is
received for 5 seconds, this function is acti-
vated in:
FM mode: 1:3 ratio (300 : 900 milliseconds)
AM mode: 1:1 ratio (2000 : 2000 milliseconds)
t Push [MENU] to exit the MENU screen.
NOTE: This function is disabled when an external
power source is used.
To Next Page
Loading...
Need help?
General
