10
GPS OPERATION
10-10
00
09
08
07
06
05
04
03
02
01
19
18
17
16
15
14
13
12
11
29
28
27
26
25
24
23
22
21
10
20
01 11 21
22
12
02
23
13
03
24
14
04
90
99
98
97
96
95
94
93
92
91
91
92
93
94
80
89
88
87
86
85
84
83
82
81
81
82
83
84
70
79
78
77
76
75
74
73
72
71
71
72
73
74
60
69
68
67
66
65
64
63
62
61
61
62
63
64
50
59
58
57
56
55
54
53
52
51
51
52
53
54
40
49
48
47
46
45
44
43
42
41
41
42
43
44
140°
40°
PN
PM
QN
QM
• The grid locator map of Japan
D Changing the Grid Locator
Grid Locator (GL) is a location compressed into a 6
character code, calculated by the longitude and the lati-
tude.
The locator is simply calculated by dividing the earth
surface into squares.
It is used to find the location of a radio station.
Square
Subsquare
Field
PM74SO
D Changing the Compass Direction
You can change the compass direction between Head-
ing Up, North Up and South Up.
q While the MY, RX1, MEM or ALM screen is dis-
played, push [QUICK] .
w Push D-pad() to select “Compass Direction,” and
then push D-pad(Ent).
e Push D-pad() to select the compass direction, and
then push D-pad(Ent).
• Heading Up: The compass always points to your
heading course direction.
• North Up: The top is always north.
• South Up: The top is always south.
Heading Up North Up South Up
D Changing the GPS memory/alarm channel
While displaying the GPS position screen, GPS memo-
ry or GPS alarm location can be changed.
q While the MEM or ALM screen is displayed, push
[QUICK] .
w Push D-pad() to select “GPS Memory Select” or
“Alarm Select,” and then push D-pad(Ent).
• The GPS Memory or Alarm Select screen appears.
e Push D-pad() to select the desired Memory or
Alarm location.
■ Checking GPS Position (Continued)
MEM screen ALM screen
To Next Page
Loading...
