6
BC RADIO OPERATION
6-18
■ BC Radio setting (Continued)
D Auto Mute
Enable this setting when you listen to the BC Radio in
the background.
q Push [MENU] .
w Push D-pad() to select the root item (“BC Radio”),
and then push D-pad(Ent) to go to the next screen.
(MENU > BC Radio > BC Radio Set> Auto Mute)
e Refer to the menu sequence shown directly above
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
r Push D-pad() to select the Auto Mute timer to
between 0 and 10 seconds (in 1 second steps), or
OFF.
• OFF: The Auto Mute function is OFF.
The BC Radio audio is not muted even
if the transceiver receives a signal on
the MAIN or SUB band.
The BC Radio audio is muted when the
transceiver transmits.
• 0 to 10sec: The BC Radio audio is automatically
muted when the transceiver transmits
or receives on the MAIN or SUB band.
After transmitting or receiving, the Auto
Mute timer starts. After the timer period
ends, you can listen to the BC Radio
again.
t Push [MENU] to exit the MENU screen.
To Next Page
Loading...
Need help?
General
