6
BC RADIO OPERATION
6-20
■ BC Radio setting (Continued)
D BC Radio Level
Set the initial audio output level difference between the
BC Radio and the A and B bands when “All” is set in
“Volume Select.” (p. 16-88)
q Push [MENU] .
w Push D-pad() to select the root item (“Sounds”),
and then push D-pad(Ent).
e Push D-pad() to select “BC Radio Level,” and then
push D-pad(Ent).
r Rotate [DIAL] to adjust.
• +5 to +1: The BC Radio audio output level is higher
than the A and B bands audio.
• 0: The BC Radio audio output level is same
as the A and B bands audio.
• –1 to –5: The BC Radio audio output level is lower
than the A and B bands audio.
t Push [MENU]
to exit the MENU screen.
To Next Page
Loading...
