Icom ID-51A User Manual

15
REPEATER AND DUPLEX OPERATIONS
15-3
■ FM Repeater operation (Continued)
D Checking the repeater input signal
You can check whether the other station’s transmit sig-
nal can be received directly or not, by listening on the
repeater input frequency.
➥ Hold down [SQL] to listen on the repeater input fre-
quency.
• While monitoring, the TX/RX indicator lights green, and
an S/RF meter dot blinks.
• While monitoring, the displayed frequency automatically
changes to the transmit frequency (repeater input fre-
quency).
• When the other station’s signal can be directly received,
move to a non-repeater frequency and use simplex. (du-
plex OFF)
While monitoring
Hold
down
[SQL]
Blinks
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)