8
D-STAR OPERATION <BASIC>
8-3
For easy operation, a Repeater List is preloaded into
your transceiver.
Example: Select the “Hirano” repeater in Japan from
the list.
q Hold down for 1 second.
• The DR screen appears.
w Push D-pad() to select “FROM,” and then push D-
pad(Ent).
e Push D-pad() to select “Repeater List,” and then
push D-pad(Ent).
r Push D-pad() to select the repeater group where
your access repeater is listed, and then push D-
pad(Ent).
• Example: “11: Japan”
• The Repeater List, described in this manual, may differ
from your transceiver’s list.
t Push D-pad() to select your access repeater, and
then push D-pad(Ent).
• Example: “Hirano”
y If the selected repeater’s name is displayed in
“FROM” on the DR screen, the access repeater set-
ting is completed.
■ Setting “FROM” (Access repeater) (Continued)
D Using the preloaded Repeater List
“FROM” is selected.
Repeater area
Repeater call sign
Completed
How to change the repeat-
er group:
While in the DR screen,
push [QUICK] to open
the Quick menu. Then se-
lect “Group Select.”
IMPORTANT!
The Repeater List described in this manual may differ
from your transceiver’s preloaded contents.
When you select an FM repeater:
You can select an FM re-
peater if it is in your trans-
ceiver’s Repeater List.
The “TO” setting is not nec-
essary for an FM repeater,
so “---” is displayed in “TO.”
(Sample)
When selecting an
FM repeater.
To Next Page
Loading...
