6
BC RADIO OPERATION
6-9
D Add a BC Radio memory
1. Adding a BC Radio Memory and entering the edit
mode
q Push [MENU]
.
w Push D-pad() to select the root item (“BC Radio”),
and then push D-pad(Ent).
e Push D-pad() to select a desired bank, and then
push D-pad(Ent).
r Push D-pad() to select the desired radio mode (AM
or FM) to be programmed.
t Push [QUICK] .
y Push D-pad() to select “Add,” and then push D-
pad(Ent).
• The BC RADIO MEM EDIT screen is displayed.
BC RADIO MEMORY
screen is displayed.
■ Adding or editing a BC Radio memory
☞ Continued on the next page
BC Radio Memory
A: Area 1
C: Area 3
B: Area 2
D: Area 4
Z:
FM
AM
FM-A Station
FM-B Station
FM-C Station
AM-A Station
AM-B Station
AM-C Station
D Using the BC Radio Memory
A total of 26 banks are selectable for BC Radio Mem-
ory. You can assign up to 50 BC Radio memory chan-
nels to each bank, for easy memory management. (A
maximum of 500 memories can be assigned to the BC
Radio Memory.)
Some area stations are preloaded into the BC Radio
memory for easy memory management.
Select “Add”
When no memory is
entered, “-- Blank --”
appears.
(Example)
TIP: The BC radio memory channel contents, de-
scribed in this manual, may differ from your trans-
ceiver’s programmed memory.
To Next Page
Loading...
Need help?
General
