6
BC RADIO OPERATION
6-10
2. Entering a BC Radio Memory name
u Push D-pad() to select “NAME,” and then push D-
pad(Ent).
i Rotate [DIAL] to select the first character.
• Selectable input characters are upper case letters, lower
case letters, numbers or symbols.
• The selected character blinks.
• Push D-pad() to move the cursor forward and back-
ward.
• While selecting a character, push [QUICK]
to change
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
to open the
input mode selection window.
• A space can be entered in any input mode.
• Rotate [DIAL] counterclockwise to enter a space.
• Push [CLR]
to delete the selected character, or hold
down [CLR]
to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-8 for entry details.
o Push D-pad() to move the cursor to the second
digit.
!0 Repeat steps i and o to enter a BC Radio Memory
name of up to 16 characters, including spaces.
!1 After entering the name, push D-pad(Ent).
Character
type selection
screen
(Example)
When entering
“FM-K Station”
☞ Continued on the next page
■ Adding or editing BC Radio memory (Continued)
To Next Page
Loading...
Need help?
General
