5
BASIC OPERATION
5-6
■ Selecting the operating band
The transceiver can receive the AIR, 144 MHz or 430
MHz bands.
You can transmit on only the 144 MHz and 430 MHz
bands.
q Push [V/MHz] to select the VFO mode, if neces-
sary.
w Push [QUICK] to open the Quick Menu screen.
e Push D-pad() to select “Band Select,” and then
push D-pad(Ent).
r Push D-pad() to select the desired frequency
band.
• Selectable frequency bands differ, depending on the
transceiver version. See the specifications for details.
(p. 19-2)
t Push D-pad(Ent) to save the setting and exit the
Quick Menu screen.
AIR band
144 MHz band
430 MHz band
To Next Page
Loading...
