5
BASIC OPERATION
5-2
■ Turning ON power
➥ Hold down [ ] for 1 second to turn ON power.
• Hold down [ ] for 1 second to turn OFF power.
• After the opening message and power source voltage
are displayed, the operating frequency or repeater name
appears.
■ Adjusting the audio level
➥ Rotate [VOL] to adjust the audio level.
• If the squelch is closed, hold down [SQL] while adjusting
the audio level.
• The display shows the volume level while adjusting.
Volume level display
No audio
Maximum audio
When “JA3YUA/ID51” is set as
your own (MY) call sign and note.
[VOL]
[ ]
TIP: The opening message and power source volt-
age display options can be turned ON or OFF in the
Display menu.
(MENU > Display > Opening Message) (p. 16-84)
(MENU >
Display
> Voltage (Power ON)) (p.
16-84
)
TIP: The beep level is adjusted in the Sounds menu.
(MENU > Sounds > Beep Level) (p. 16-89)
To Next Page
Loading...
Need help?
General
