2
USING A microSD CARD
2-10
■ Loading the saved data files that are on the microSD card
The saved memory channels, item settings the in menu
list and Repeater List can be copied to the transceiver.
This function is convenient when copying the saved
data, such as memory channels, or Repeater List, to
another ID-51A/E and then operating with the same
data.
Saving the current data is recommended before load-
ing other data in the transceiver.
(Example: Loading all the data in the
“Set20161001_01” file)
q Push [MENU]
.
w Push D-pad() to select the root item (“SD Card”),
and then push D-pad(Ent).
e Push D-pad() to select “Load Setting,” and then
push D-pad(Ent).
r Push D-pad() to select the desired file to be load-
ed, and then push D-pad(Ent).
(Example: Selecting “Set20140801_01”)
• The LOAD FILE screen appears.
t Push D-pad() to select the desired loading con-
tent, as shown below.
• ALL:
Loads all memory channels, item settings in the menu
list and the Repeater List into the transceiver.
• Except My Station:
Loads all memory channels, item settings in the
menu list except MY call signs and the Repeater List
into the transceiver.
• Repeater List Only:
Loads only the Repeater List into the transceiver.
(☞ Continued on the next page)
To update the Repeater
List, click here!
To Next Page
Loading...
Need help?
General
