2
USING A microSD CARD
2-14
■ Importing or Exporting a CSV format file
Please read this section before importing or exporting a
Comma Separated Values (CSV) format file to or from
the microSD card.
You can import or export the following data:
• Your Call Sign Memory
• Repeater List
• GPS Memory
D Importing
TIP: Before importing, make a backup file of all the
transceiver’s data to the microSD card in case of data
loss.
Example: Importing the Your Call sign memory.
q Push [MENU]
to enter the Menu screen.
w Push D-pad() to select the root item (“SD Card”),
and then push D-pad(Ent) to go to the next level.
( MENU > SD Card > Import/Export > Import > Your
Call Sign)
e Refer to the menu sequence shown directly above
and push D-pad() to select, and then push D-
pad(Ent) to enter, one or more times until the last
screen is displayed.
r Push D-pad() to select the CSV file to import.
(Example: Selecting “Your20161001_01”)
t Push D-pad(Ent).
• “Import file?” appears.
y Push D-pad() to select “YES,” and then push D-
pad(Ent).
• Starts to import.
• After importing ends, “COMPLETED! Reboot the ID-51.”
appears.
u To complete the importing, reboot the transceiver.
NOTE: The transceiver cannot display a file that has a
file name longer than 16 characters.
In this case, rename it using 15 characters or less.
When you export the data in a CSV format file using
the CS-51PLUS2 (contained in the CD), make sure to
name it using 15 characters or less.
TIP: To import a Repeater List, see step t on page
2-10 for details.
To Next Page
Loading...
Need help?
General
