10
GPS OPERATION
10-18
D Entering the GPS group name
You can enter a name for each GPS group.
q Push [MENU] .
w Push D-pad() to select the root item (“GPS”), and
then push D-pad(Ent).
e Push D-pad() to select “GPS Memory,” and then
push D-pad(Ent).
r Push D-pad() to select the desired group to edit
its name.
t Push [QUICK] .
y Push D-pad() to select “Edit Name,” and then push
D-pad(Ent).
u The group name editing screen appears.
i Rotate [DIAL] to select the first character.
• Selectable input characters are upper case letters, lower
case letters, numbers or symbols.
• The selected character blinks.
• Push D-pad() to move the cursor forward or backward.
• While selecting a character, push [QUICK]
to change
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
to open the
input mode selection window.
• A space can be entered in any input mode.
• Rotate [DIAL] counterclockwise to enter a space.
• Push [CLR]
to delete the selected character, or hold
down [CLR]
to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-8 for entry details.
o Push D-pad() to move the cursor to the second
digit.
!0 Repeat steps i and o to enter a group name of up
to 16 characters, including a space.
!1 After entering the name, push D-pad(Ent).
GPS MEMORY
screen
■ GPS memory operation (Continued)
Select
Group name
editing screen
Character
type selection
screen
(Example)
When a group
name is entered as
“My Favorite.”
To Next Page
Loading...
