9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-42
■ Repeater detail screen
Depending on the contents, such as position data, UTC
offset, and so on, the distance between your position
and the repeater or repeater time can be displayed on
the REPEATER DETAIL screen.
q Hold down for 1 second.
• The DR screen is displayed.
w Push D-pad() to select “TO,” and then push D-
pad(Ent).
e Push D-pad() to select “Gateway CQ,” and then
push D-pad(Ent).
r Push D-pad() to select the repeater group, and
then push D-pad(Ent).
• Example: “11: Japan”
t Push D-pad() to select the repeater, and then push
D-pad(Ent).
• Example: “Hirano”
y Push [QUICK] .
u Push D-pad() to select “Detail,” and then push D-
pad(Ent).
• The REPEATER DETAIL screen is displayed.
i Push D-pad(Ent) to return to the RPT LIST screen.
To view the repeater details screen when the DR
screen is displayed:
q Push [QUICK] to open the quick menu screen.
w Push D-pad() to select “Repeater Detail,” and
then push D-pad(Ent).
• The REPEATER DETAIL screen is displayed.
Repeater is set in “FROM” “Repeater Detail” is selected
* When the position data accuracy level is set to “Approxi-
mate,” direction data is not displayed if the distance to the
repeater is under 5 kilometers.
Example: Shows the “Hirano” repeater detail screen
Repeater
name
Sub name
Group
number
Call sign
Duplex setting
Repeater time
Repeater
frequency
Distance from
your position
Direction from your position*
To Next Page
Loading...
Need help?
General
