12
MEMORY OPERATION
12-9
■ Selecting a Memory bank
q Push [M/CALL] one or more times to select the
Memory mode.
w Push [QUICK] to open the Quick Menu screen.
e Push D-pad() to select “Bank Select,” and then
push D-pad(Ent).
r Rotate [DIAL] to select a desired bank group, “A” to
“Z.”
• Only Bank groups that have memory channels assigned
to them are displayed.
t Push D-pad(Ent) to set.
y Rotate [DIAL] to select a desired bank channel.
• Only assigned bank channels are displayed.
• To return to the Memory channels display, repeat steps
w to e, and select “OFF” in step r.
[DIAL]
Push [M/CALL] one
or more times to select
the Memory mode.
Push [QUICK]
, then
push D-pad() to select
“Bank Select.”
Rotate [DIAL] to select the
bank group “A.”
Push D-pad(Ent) to set.
Rotate [DIAL] to select a
desired bank channel.
Example: Selecting the bank group “A.”
To Next Page
Loading...
Need help?
General
