9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-32
The FM repeater or FM simplex mode
These items appear only when ‘2. Selecting the com-
munication type’ is set to “FM Repeater” or “FM Sim-
plex.”
1. Setting the FM mode
q Push D-pad(
) to select “MODE,” and then push
D-pad(Ent) to enter the mode selection mode.
w Push D-pad(
) to select “FM” or “FM-N” and then
push D-pad(Ent).
2. Setting the tone
e Push D-pad(
) to select “TONE,” and then push D-
pad(Ent) to enter the tone selection mode.
r Push D-pad() to select “TONE,” “TSQL” or “OFF,”
and then push D-pad(Ent).
• OFF: Turn the tone function OFF.
• TONE: Select when the repeater requires an access
tone.
• TSQL: Select when you want to use the tone squelch
operation in simplex.
3. Setting the repeater tone
This setting is required when ‘Setting the tone’ above
is set to “TONE” or “TSQL.”
t Push D-pad(
) to select “REPEATER TONE,” and
then push D-pad(Ent) to enter the tone selection
mode.
y Push D-pad() to set the tone frequency, and then
push D-pad(Ent).
■ Entering information into Repeater List
D New repeater entry (Continued)
When ‘2. Selecting the communication type’ is set to
“DV Repeater” or “DV Simplex,” skip this page and go
to the next page.
☞ Continued on the next page.
To Next Page
Loading...
Need help?
General
