14
PRIORITY WATCH
14-7
4. During the Priority watch
Sequentially checks the Memory or Bank channels ev-
ery 5 seconds, while receiving on a VFO frequency.
5. When a signal is received
• When “ON” is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks.
- The scan pause timer and resume settings are the
same as for a normal scan. (p. 16-18)
• When “Bell” is selected.
When a signal is received on the priority channel, a
beep sounds and the “
” icon blinks.
Example:
Sequentially c
hecks the Memory channels while
receiving on 145.800 MHz.
Example:
Sequentially c
hecks Bank channels while re-
ceiving on 145.800 MHz.
■ VFO frequency and a Memory/Bank scan (Continued)
Appears
Checks the Memory chan-
nel every 5 seconds.
The Memory chan-
nels are sequential-
ly checked.
Checks the Bank channel
every 5 seconds.
The bank channels
are sequentially
selected.
Appears
Automatically selects the Memory channel.
Remains the VFO mode.
Example: For a Memory scan
Blinks
Blinks
Appears
Appears
To Next Page
Loading...
