14
PRIORITY WATCH
14-9
5. When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel,
a beep sounds and the “
” icon blinks. The VFO
scan resumes.
Blinks
■ VFO scan and a priority channel (Continued)
Checks the Bank channel
every 5 seconds.
4. During the Priority watch
Checks the selected priority channel every 5 seconds,
while VFO scanning
Appears Appears
Checks the Memory chan-
nel every 5 seconds.
Example:
Checks M-CH “490” while VFO scanning
Example:
Checks Bank-CH “D06” while VFO scanning
Appears Appears
Blinks
Example:
Checks Call-CH “C3” while VFO scanning
Appears Appears
Blinks
Checks the Call channel
every 5 seconds.
Automatically selects the priority channel.
Remains the VFO mode.
Example: For a Memory channel
Blinks
Blinks
Blinks
Blinks
To Next Page
Loading...
