Icom ID-51A User Manual

14
PRIORITY WATCH
14-15
5. When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel, the
channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel, a
beep sounds and the “
” icon blinks.
Automatically selects the priority channel.
Remains on the DR screen.
Example: For a Memory channel
Blinks
Blinks
■ A frequency in “FROM” on the DR screen and a priority channel (Continued)
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)