16
MENU SCREEN
16-15
NOTE: The default settings shown below are for the USA version.
The default settings may differ, depending on your transceiver version.
■ Menu items and Default settings (Continued)
Others
Clone Clone Mode
Clone Master Mode
DESCRIPTIONS
Reads or writes the CS-51PLUS2 data
from or to the PC, and/or to receive data
from a Master transceiver.
Writes your ID-51A/E (Master) data to an-
other ID-51A/E (Sub).
Information Voltage
Version
Shows the battery voltage.
Shows the transceiver’s firmware version
number.
Reset Partial Reset
All Reset
Returns all settings to their defaults, with-
out clearing the memory contents, call
sign memories or Repeater List.
Clears all entries and memories, and re-
turn all settings to their defaults.
SD Card
*1
Load Setting
Save Setting
Import/Export
File selection
<<New File>>
File selection
Import
ALL, Except My Station,
Repeater List Only
Your Call Sign, Repeater List,
GPS memory
Your Call Sign, Repeater List,
GPS memory
In this item, set the microSD card options.
DESCRIPTIONS
RANGE OR VALUE (Default is shown in bold)
Loads the settings file to the transceiver.
Imports data to the transceiver.
Exports data from the transceiver.
Saves the settings as a new file.
Saves the settings in a selected file.
Format
SD Card Info
Unmount
Electronically unmounts the card.
Formats the card.
Displays the free space and remaining re-
cording time of the card.
CSV format
Selects the separator and the decimal charac-
ter that are used in the CSV format data.
Selects the date format.
Separator/
Decimal
Date
Sep [,] Dec [.]*
2
, Sep [;] Dec [.]
or Sep [;] Dec [,]
yyyy/mm/dd, mm/dd/yyyy*
2
or dd/mm/yyyy
Export
*
1
Be sure to insert the microSD card into the transceiver before selecting these items.
*
2
The default value may differ, depending on the transceiver version.
To Next Page
Loading...
Need help?
General
