16
MENU SCREEN
16-44
■ GPS items (Continued)
Symbol (Default: Person)
GPS > GPS TX Mode > D-PRS (DV-A) > Symbol
The symbol is an icon which represents your means of transportation or
location. The stored symbol in the selected symbol memory (1 to 4) is trans-
mitted with position data while in the D-PRS (DV-A) mode.
To change the symbol icon, push D-pad(
) to select, and then push D-
pad(Ent) to set.
This symbol item will be hidden when “NMEA (DV-G)” or “OFF” is selected in
“GPS TX Mode.”
Symbol memory
A symbol can be set to symbol memory 1 to 4.
You can select a desired symbol different than the set one or other symbol by
entering a 2 character symbol code.
Selecting a symbol with a 2 character symbol code
q
Push D-pad() to select a desired symbol memory between 1 and 4.
w Push [QUICK] to select “Edit Symbol,” and then push D-pad(Ent).
e Push [QUICK] again.
r Push D-pad() to select “Direct Input,” and then push D-pad(Ent).
t Rotate [DIAL] to select the first digit.
• Usable characters: /, \, 0 to 9, A to Z
y Push to select the second digit.
Second digit is selected
u Rotate [DIAL] to select the second digit, and then push D-pad(Ent).
• Usable characters: Alphanumeric characters and symbols
i Push D-pad(Ent) to set the symbol into the memory selected in step q.
• Returns to the SYMBOL screen.
o Pushing D-pad(Ent) again to set the symbol memory, selected in step q,
which is used for D-PRS (DV-A) operation.
To Next Page
Loading...
